Samsung Unlocking Instructions - Software

General instructions (will work for most phones):

  1. Turn off your Samsung phone
  2. Insert a non-accepted sim card (different from the original carrier). 
  3. Turn on the phone. 
  4. Slide to unlock and it will ask for the unlock code
  5. Enter the unlock code you obtained from UnlockRiver.com
  6. Your phone is now fully unlocked!

If you enter an non-accepted Sim Card and your phone does not prompt to enter Unlock Code:
Method 1:
  1. Go to the dial screen and press #7465625*638*# 
  2. Once prompted for code, enter 8 digit Unlock Code provided by unlockriver.com.

Method 2:
  1. Turn off your Samsung phone
  2. Insert a non-accepted sim card (different from the original carrier) and turn your phone back on. 
  3. When prompted for the unlock code type the UNFREEZE code provided.  If you are not prompted, go to your dial screen and type the UNFREEZE code, now press enter, send or call. You will receive an unsuccesfull message, don't worry.
  4. Once the phone freeze is disabled, the Network lock or SP Lock screen will appear
  5. For Network lock enter the UNLOCK code provided.  For SP Lock enter the SERVICE PROVIDER code
  6. Your phone is now fully unlocked!

If you get "unsuccessful" again then hit Dismiss button and type *2767*3855# on phone keypad and try this procedure again (CAUTION! This will reformat all your data!).
Method 3:
  1. You can try this method without the sim card or with the original sim card
  2. Type #7465625*638*CODE# (CODE is the Unlock Code we sent you)
  3. Phone deactivated message means its unlocked

Method 4:
  1. You can try this method without the sim card or with the original sim card
  2. Type: #0111*CODE#  (CODE is the Unlock Code we sent you)

How to enter unlock code on Samsung models: SGH-A127, SGH-E840, SGH-F210, SGH-J600, SGH-T749
  1. Turn ON your phone without Sim Card
  2. Type #0111*CODE# (CODE is the Unlock Code I sent you)
  3. Device should say "Network Lock Deactivated"
  4. The phone may reboot and the unlock is completed

How to enter unlock code on Samsung SGH-A877
  1. Insert an Authorized Sim Card and turn ON your phone
  2. Device must be in Portrait mode. Hit the Dial button on the touch screen.
  3. Type #7465625*638*CODE# (CODE is the Unlock Code we sent you)
  4. Device should say: "Network Lock Deactivated"
  5. Phone may automatically reboot

How to enter unlock code on Samsung models: A737, A777, Blackjack SGH-i607, SGH-i616, SGH-i617, SGH-i627, SGH-i637, SGH-A877
  1. Insert an Authorized Sim Card and turn ON your phone
  2. Type  #7465625*638*CODE# (CODE is the Unlock Code we sent you)
  3. Device should say: "Network Lock Deactivated"
  4. Phone may automatically reboot

NOTE: If you are unable to connect to service provider or unable to make outgoing calls or receive messages, this has nothing to do with your phone being locked or not, you need to force the Blackjack to change to GSM mode, this can be done as follows:
  1. Type *#1546792*#
  2. Select Option 3 Network & Call Settings
  3. Select option 5 Network Mode
  4. Select GSM
  5. This should resolve your problem.

How to enter unlock code on Samsung phones from: AT&T / Cingular BlackJack
  1. Insert a non-accepted Sim Card and turn ON your phone
  2. Power on the device. Wait approximately 30 seconds until the Sim Lock application appears (the delay may be longer if the user has already attempted an unlock with the wrong code)
  3. Enter the unlock code in the blank field
  4. Press Ok. If the Unlock Code is incorrect, an error dialog will appear.  After pressing Ok on this dialog, the user has to re-enter the Unlock Code after delays (see above in Device Specific Information). If the Unlock Code is correct, a success dialog will appear.
  5. Press Ok
  6. The device is now unlocked and should continue booting

NOTE: If you are unable to connect to service provider or unable to make outgoing calls or receive messages, this has nothing to do with your phone being locked or unlocked, you need to force the BlackJack to change to GSM mode, this can be done as follows:
  1. Power on your Phone
  2. Type *#1546792*#
  3. Select Option 3 Network & Call Settings
  4. Select option 5 Network Mode
  5. Select GSM

How to enter unlock code on Samsung Models: i450 & i560
  1. Turn ON your phone without Sim Card
  2. Type #PW+Unlock Code+1#

The letter P appear after you press star button (*) three times quickly
The letter W appear after you press the star button (*) four times quickly
The letter + appear after you press the star button (*) two times quickly

How to enter unlock code on Samsung J600
Unlock Code is entered as: #0149*UNFREEZE# or #0111*UNLOCK#

How to enter unlock code on Samsung SGH-P207
  1. Reset to original factory setting by typing *2767*3855#, your phone will reboot
  2. Insert a non-accepted Sim Card and turn ON your phone
  3. A Wrong Sim message will appear
  4. Enter * #9998*3323#
  5. Exit white screen appear, tap the right soft key, (occasionally it will not go to the next screen, if so press the down key)
  6. A menu will appears, scroll down to the malloc Fail option, this will reboot, and normal service screen will appear
  7. Enter *0141# and press the green Call key
  8. Personalized screen appear, the name of the current Sim Card provider will appear on the screen
  9. Turn phone OFF, and then turn back ON
  10. Go to menu by tapping left soft key
  11. Settings is in bottom right hand corner
  12. Select option 7 = Security
  13. Select option 6 = Sim Lock
  14. Select option 1 = Disable
  15. Enter 00000000 (eight zeros), the message will come up Sim lock disabled with a check mark; your phone is now unlocked to use with other carriers.


How to enter unlock code on Samsung SGH-T609
  1. Turn ON your phone without Sim Card
  2. Type #011*CODE# (CODE is the Unlock Code we sent you)
  3. Device should say: "Network Lock Deactivated"
  4. Phone may automatically reboot

How to enter unlock code on Samsung Models: Z320i, Z510, Z650i
  1. Insert a non-accepted Sim Card and turn ON your phone
  2. Type **CODE# (CODE is the Unlock Code we sent you)


Added:

- support SM-T587P (Flash, Unlock(TEST), Read/Write QCN, Read/Write EFS, Read/Write SEC, Write CERT, Reset FRP)
- support SM-T560NU (Flash, Read/Write EFS, Reset FRP)

- support SM-J320W8 (Flash, Read/Write EFS, Read/Write CERT, Unlock, Read codes, repair, patch cert) - first world
- support M-G530T1 (Flash, Read/Write QCN, Read/Write EFS, Read/Write SEC, Write CERT, Reset FRP)
- support SC-01G (Flash, Read/Write QCN, Read/Write EFS, Read/Write SEC, Write CERT, Reset FRP)

- support SM-C9000 (Flash, Read/Write QCN, Read/Write EFS, Read/Write SEC, Write CERT, Reset FRP, Unlock via MSL(if you have msl code))
- support SM-G5510 (Flash, Read/Write QCN, Read/Write EFS, Read/Write SEC, Write CERT, Unlock via MSL(if you have msl code)) 
- support SM-G5520 (Flash, Read/Write QCN, Read/Write EFS, Read/Write SEC, Write CERT, Unlock via MSL(if you have msl code))

- support SM-C5000 (unlock via msl code(if you have msl code))
- support SM-C7000 (unlock via msl code(if you have msl code))
- support SM-J320N0 (unlock via msl code(if you have msl code))
- support SM-J320Y (unlock via msl code(if you have msl code))
- support SM-J320YZ (unlock via msl code(if you have msl code))
- support SM-J320ZN (unlock via msl code(if you have msl code))

Improved:
- write NV data algo - now without auto reboot after write
- repair S6 (G920x, G925x...) algo: now will ask if HMAC mismatch.
If you have Security damaged error -write NV data from working phone and then without reboot - do phone phone repair

Fixed:
- patch CERT error(4 8) on J120x A310F
- SM-J700T, SM-J700T1, Unlock, Read/Write CERT

How To Flash Samsung Mobile Phone

  1. Download and install z3x box Software
  2. Connect your z3x box with pc or laptop
  3. Open Z3x Box Software Find In Desktop
  4. Select model example n7000
  5. Select same model firmware
  6. Click Flash button in z3x software
- support SM-G570F (Flashing, Read/Write EFS, Reset FRP, reboot to download/recovery) - First World
- support SM-G570M (Flashing, Read/Write EFS, Reset FRP, reboot to download/recovery)
- support SM-G610F (Flashing, Read/Write EFS, Reset FRP, reboot to download/recovery)

- support SM-T377T (Flashing, Unlock, Read/Write EFS, Reset FRP, Repair, reboot to download/recovery, Reset MSL)

- support SM-G1600 (Flashing, Read/Write EFS, Read/Write QCN, Read/Write SEC, reboot to download/recovery)
- support SM-G6100 (Flashing, Read/Write EFS, Read/Write QCN, Read/Write SEC, reboot to download/recovery)
Setup Download
Changes:
As you know new firmware qualcomm phones need root for work AT RIL, so we made some changes:

- autodetect requed phone root for work AT RIL.

Fixed some bugs

support SM-A310F (Repair DRK, DMVT (Fix dm-verity verification)
support SM-A310FD (Repair DRK, DMVT (Fix dm-verity verification)
support SM-A310M (Repair DRK, DMVT (Fix dm-verity verification)
support SM-A310MD (Repair DRK, DMVT (Fix dm-verity verification)
support SM-A310N0 (Repair DRK, DMVT (Fix dm-verity verification)
support SM-A310Y (Repair DRK, DMVT (Fix dm-verity verification)

support SM-A5108 (Repair DRK, DMVT (Fix dm-verity verification)
support SM-A510F (Repair DRK, DMVT (Fix dm-verity verification)
support SM-A510FD (Repair DRK, DMVT (Fix dm-verity verification)
support SM-A510K (Repair DRK, DMVT (Fix dm-verity verification)
support SM-A510L (Repair DRK, DMVT (Fix dm-verity verification)
support SM-A510M (Repair DRK, DMVT (Fix dm-verity verification)
support SM-A510MD (Repair DRK, DMVT (Fix dm-verity verification)
support SM-A510S (Repair DRK, DMVT (Fix dm-verity verification)
support SM-A510Y (Repair DRK, DMVT (Fix dm-verity verification)

support SM-A7108 (Repair DRK, DMVT (Fix dm-verity verification)
support SM-A710F (Repair DRK, DMVT (Fix dm-verity verification)
support SM-A710FD (Repair DRK, DMVT (Fix dm-verity verification)
support SM-A710K (Repair DRK, DMVT (Fix dm-verity verification)
support SM-A710L (Repair DRK, DMVT (Fix dm-verity verification)
support SM-A710M (Repair DRK, DMVT (Fix dm-verity verification)
support SM-A710S (Repair DRK, DMVT (Fix dm-verity verification)
support SM-A710Y (Repair DRK, DMVT (Fix dm-verity verification)

support SM-G930P (Read/Write QCN, Read/Write EFS, flashing, Unlock(test))
support SM G935P(Read/Write QCN, Read/Write EFS, flashing, Unlock(test))

- auto check and download new Recovery version on server Mediafire

New Samsung Tool PRO 27.7  DOWNLOAD SETUP

New Samsung Recovery Pack 1.3  DOWNLOAD SETUP

Samsung Tool PRO 26.9  DOWNLOAD SETUP

Z3x v23.1 DOWNLOAD SETUP

File PassWord Is------  androidflashfile.com



Download : Google Drive

Download : Mediafire

Post a Comment